✨ New Arrivals Just Dropped!Explore
HomeStore
Texas Instruments PCA9306DCTR Voltage Level Translator Bidirectional 2 Input 64 mA 900 ps 0 V to 5 SSOP-8
Texas Instruments PCA9306DCTR Voltage Level Translator Bidirectional 2 Input 64 mA 900 ps 0 V to 5 SSOP-8
The PCA9306DCTR is a dual bidirectional I?C and SMBus voltage-level Translator IC with an enable (EN) input, is operational from 1.2 to 3.3V VREF1 and 1.8 to 5.5V VREF2. It allows bidirectional voltage translations between 1.2 and 5V, without the use of a direction pin. The low ON-state resistance (RON) of the switch allows connections to be made with minimal propagation delay. When EN is high, the translator switch is ON and the SCL1 and SDA1 I/O are connected to the SCL2 and SDA2 I/O, respectively, allowing bidirectional data flow between ports. When EN is low, the translator switch is off and a high-impedance state exists between ports. In addition to voltage translation, the IC can be used to isolate a 400kHz bus from a 100kHz by controlling the EN pin.
All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.
- 2-bit Bidirectional Translator for SDA and SCL Lines in Mixed-mode
- I?C Applications
- I?C and SMBus Compatible
- 1.5ns Propagation delay to accommodate Standard-mode and Fast-mode I?C devices and Multiple Masters
- Provides Bidirectional Voltage Translation with No Direction Pin
- Low 3.5R ON-state Connection Between Input and Output Ports Provides Less Signal Distortion
- Open-drain I?C I/O Ports (SCL1, SDA1, SCL2 and SDA2)
- 5V Tolerant I?C I/O Ports to Support Mixed-mode Signal Operation
- High-impedance SCL1, SDA1, SCL2 and SDA2 Pins for EN = Low
- Lock-up-free Operation for Isolation When EN = Low
- Flow-through Pin-out for Ease of Printed Circuit Board Trace Routing
- Latch-up Performance Exceeds 100mA Per JESD 78, Class II
- Green Product, No Sb/Br
Signal Processing, Communications & Networking, Computers & Computer Peripherals, Industrial, Automation & Process Control
Warnings Device has limited built-in ESD protection, leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates.Other details
| Brand | TEXAS INSTRUMENTS |
| Part Number | PCA9306DCTR |
| Quantity | Each (Supplied on Cut Tape) |
All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them. Image is for illustrative purposes only. Please refer to product description.
All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.
$0.42
Original: $1.40
-70%Texas Instruments PCA9306DCTR Voltage Level Translator Bidirectional 2 Input 64 mA 900 ps 0 V to 5 SSOP-8—
$1.40
$0.42Texas Instruments PCA9306DCTR Voltage Level Translator Bidirectional 2 Input 64 mA 900 ps 0 V to 5 SSOP-8
The PCA9306DCTR is a dual bidirectional I?C and SMBus voltage-level Translator IC with an enable (EN) input, is operational from 1.2 to 3.3V VREF1 and 1.8 to 5.5V VREF2. It allows bidirectional voltage translations between 1.2 and 5V, without the use of a direction pin. The low ON-state resistance (RON) of the switch allows connections to be made with minimal propagation delay. When EN is high, the translator switch is ON and the SCL1 and SDA1 I/O are connected to the SCL2 and SDA2 I/O, respectively, allowing bidirectional data flow between ports. When EN is low, the translator switch is off and a high-impedance state exists between ports. In addition to voltage translation, the IC can be used to isolate a 400kHz bus from a 100kHz by controlling the EN pin.
All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.
- 2-bit Bidirectional Translator for SDA and SCL Lines in Mixed-mode
- I?C Applications
- I?C and SMBus Compatible
- 1.5ns Propagation delay to accommodate Standard-mode and Fast-mode I?C devices and Multiple Masters
- Provides Bidirectional Voltage Translation with No Direction Pin
- Low 3.5R ON-state Connection Between Input and Output Ports Provides Less Signal Distortion
- Open-drain I?C I/O Ports (SCL1, SDA1, SCL2 and SDA2)
- 5V Tolerant I?C I/O Ports to Support Mixed-mode Signal Operation
- High-impedance SCL1, SDA1, SCL2 and SDA2 Pins for EN = Low
- Lock-up-free Operation for Isolation When EN = Low
- Flow-through Pin-out for Ease of Printed Circuit Board Trace Routing
- Latch-up Performance Exceeds 100mA Per JESD 78, Class II
- Green Product, No Sb/Br
Signal Processing, Communications & Networking, Computers & Computer Peripherals, Industrial, Automation & Process Control
Warnings Device has limited built-in ESD protection, leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates.Other details
| Brand | TEXAS INSTRUMENTS |
| Part Number | PCA9306DCTR |
| Quantity | Each (Supplied on Cut Tape) |
All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them. Image is for illustrative purposes only. Please refer to product description.
All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The PCA9306DCTR is a dual bidirectional I?C and SMBus voltage-level Translator IC with an enable (EN) input, is operational from 1.2 to 3.3V VREF1 and 1.8 to 5.5V VREF2. It allows bidirectional voltage translations between 1.2 and 5V, without the use of a direction pin. The low ON-state resistance (RON) of the switch allows connections to be made with minimal propagation delay. When EN is high, the translator switch is ON and the SCL1 and SDA1 I/O are connected to the SCL2 and SDA2 I/O, respectively, allowing bidirectional data flow between ports. When EN is low, the translator switch is off and a high-impedance state exists between ports. In addition to voltage translation, the IC can be used to isolate a 400kHz bus from a 100kHz by controlling the EN pin.
All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.
- 2-bit Bidirectional Translator for SDA and SCL Lines in Mixed-mode
- I?C Applications
- I?C and SMBus Compatible
- 1.5ns Propagation delay to accommodate Standard-mode and Fast-mode I?C devices and Multiple Masters
- Provides Bidirectional Voltage Translation with No Direction Pin
- Low 3.5R ON-state Connection Between Input and Output Ports Provides Less Signal Distortion
- Open-drain I?C I/O Ports (SCL1, SDA1, SCL2 and SDA2)
- 5V Tolerant I?C I/O Ports to Support Mixed-mode Signal Operation
- High-impedance SCL1, SDA1, SCL2 and SDA2 Pins for EN = Low
- Lock-up-free Operation for Isolation When EN = Low
- Flow-through Pin-out for Ease of Printed Circuit Board Trace Routing
- Latch-up Performance Exceeds 100mA Per JESD 78, Class II
- Green Product, No Sb/Br
Signal Processing, Communications & Networking, Computers & Computer Peripherals, Industrial, Automation & Process Control
Warnings Device has limited built-in ESD protection, leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates.Other details
| Brand | TEXAS INSTRUMENTS |
| Part Number | PCA9306DCTR |
| Quantity | Each (Supplied on Cut Tape) |
All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them. Image is for illustrative purposes only. Please refer to product description.
All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.
