✨ New Arrivals Just Dropped!Explore
HomeStore
Texas Instruments SN74LVC1T45MDCKREP SN74LVC1T45MDCKREP Transceiver 74LVC1T245 1.65 V to 5.5 SC-70-6
Texas Instruments SN74LVC1T45MDCKREP SN74LVC1T45MDCKREP Transceiver 74LVC1T245 1.65 V to 5.5 SC-70-6
The SN74LVC1T45MDCKREP is an enhanced single-bit dual-supply Bus/Configurable Voltage Transceiver with 3-state outputs. This non-inverting bus transceiver uses two separate configurable power-supply rails. The A port is designed to track VCCA. VCCA accepts any supply voltage from 1.65 to 5.5V. The B port is designed to track VCCB. VCCB accepts any supply voltage from 1.65 to 5.5V. This allows for universal low-voltage bidirectional translation between any of the 1.8/2.5/3.3/5V voltage nodes. It is designed for asynchronous communication between two data buses. The logic levels of the direction-control (DIR) input activate either the B-port outputs or the A-port outputs. The device transmits data from the A bus to the B bus when the B-port outputs are activated and from the B bus to the A bus when the A-port outputs are activated. The input circuitry on both A and B ports always is active and must have a logic HIGH or LOW level applied to prevent excess ICC and ICCZ.
- VCC Isolation - If either VCC input Is at GND, both ports are in the high-impedance state
- DIR Input circuit referenced to VCCA
- IOFF Supports partial-power-down mode operation
- Controlled baseline
- One assembly/test site
- One fabrication site
- Extended life cycle
- Latch-up performance exceeds 100mA per JESD 78, class II
- 4µA ICC Low power consumption
- ±24mA Output drive at 3.3V
- Green product and no Sb/Br
Aerospace, Defence, Military, Avionics, Medical
Other details
| Brand | TEXAS INSTRUMENTS |
| Part Number | SN74LVC1T45MDCKREP |
| Quantity | Each (Supplied on Cut Tape) |
All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them. Image is for illustrative purposes only. Please refer to product description.
$5.48
Texas Instruments SN74LVC1T45MDCKREP SN74LVC1T45MDCKREP Transceiver 74LVC1T245 1.65 V to 5.5 SC-70-6—
$5.48
Texas Instruments SN74LVC1T45MDCKREP SN74LVC1T45MDCKREP Transceiver 74LVC1T245 1.65 V to 5.5 SC-70-6
The SN74LVC1T45MDCKREP is an enhanced single-bit dual-supply Bus/Configurable Voltage Transceiver with 3-state outputs. This non-inverting bus transceiver uses two separate configurable power-supply rails. The A port is designed to track VCCA. VCCA accepts any supply voltage from 1.65 to 5.5V. The B port is designed to track VCCB. VCCB accepts any supply voltage from 1.65 to 5.5V. This allows for universal low-voltage bidirectional translation between any of the 1.8/2.5/3.3/5V voltage nodes. It is designed for asynchronous communication between two data buses. The logic levels of the direction-control (DIR) input activate either the B-port outputs or the A-port outputs. The device transmits data from the A bus to the B bus when the B-port outputs are activated and from the B bus to the A bus when the A-port outputs are activated. The input circuitry on both A and B ports always is active and must have a logic HIGH or LOW level applied to prevent excess ICC and ICCZ.
- VCC Isolation - If either VCC input Is at GND, both ports are in the high-impedance state
- DIR Input circuit referenced to VCCA
- IOFF Supports partial-power-down mode operation
- Controlled baseline
- One assembly/test site
- One fabrication site
- Extended life cycle
- Latch-up performance exceeds 100mA per JESD 78, class II
- 4µA ICC Low power consumption
- ±24mA Output drive at 3.3V
- Green product and no Sb/Br
Aerospace, Defence, Military, Avionics, Medical
Other details
| Brand | TEXAS INSTRUMENTS |
| Part Number | SN74LVC1T45MDCKREP |
| Quantity | Each (Supplied on Cut Tape) |
All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them. Image is for illustrative purposes only. Please refer to product description.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The SN74LVC1T45MDCKREP is an enhanced single-bit dual-supply Bus/Configurable Voltage Transceiver with 3-state outputs. This non-inverting bus transceiver uses two separate configurable power-supply rails. The A port is designed to track VCCA. VCCA accepts any supply voltage from 1.65 to 5.5V. The B port is designed to track VCCB. VCCB accepts any supply voltage from 1.65 to 5.5V. This allows for universal low-voltage bidirectional translation between any of the 1.8/2.5/3.3/5V voltage nodes. It is designed for asynchronous communication between two data buses. The logic levels of the direction-control (DIR) input activate either the B-port outputs or the A-port outputs. The device transmits data from the A bus to the B bus when the B-port outputs are activated and from the B bus to the A bus when the A-port outputs are activated. The input circuitry on both A and B ports always is active and must have a logic HIGH or LOW level applied to prevent excess ICC and ICCZ.
- VCC Isolation - If either VCC input Is at GND, both ports are in the high-impedance state
- DIR Input circuit referenced to VCCA
- IOFF Supports partial-power-down mode operation
- Controlled baseline
- One assembly/test site
- One fabrication site
- Extended life cycle
- Latch-up performance exceeds 100mA per JESD 78, class II
- 4µA ICC Low power consumption
- ±24mA Output drive at 3.3V
- Green product and no Sb/Br
Aerospace, Defence, Military, Avionics, Medical
Other details
| Brand | TEXAS INSTRUMENTS |
| Part Number | SN74LVC1T45MDCKREP |
| Quantity | Each (Supplied on Cut Tape) |
All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them. Image is for illustrative purposes only. Please refer to product description.
