✨ New Arrivals Just Dropped!Explore
Texas Instruments SN74HC574DWR Flip-Flop 74HC574 D 24 ns MHz Soic
The SN74HC574DWR is an octal edge-triggered D-type Flip-flop with 3-state outputs. It is designed specifically for bus driving. They are particularly suitable for implementing buffer registers, I/O ports, bidirectional bus drivers and working registers. The eight flip-flops enter data on the low-to-high transition of the clock (CLK) input. A buffered output-enable (OE\) input can be used to place the eight outputs in either a normal logic state (high or low logic levels) or the high-impedance state. In the high-impedance state, the outputs neither load nor drive the bus lines significantly. The high-impedance state and increased drive provide the capability to drive bus lines without interface or pull-up components. OE\ does not affect the internal operations of the flip-flops. Old data can be retained or new data can be entered while the outputs are in the high-impedance state.
All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.
- High-current 3-state non-inverting outputs drive bus lines directly or up to 15 LSTTL loads
- Bus-structured pinout
- 22ns Typical tpd
- 80?A Maximum low power consumption
- ?6mA Output drive at 5V
- 1?A Maximum low input current
- Green product and no Sb/Br
Communications & Networking, Industrial
Other details
| Brand | TEXAS INSTRUMENTS |
| Part Number | SN74HC574DWR |
| Quantity | Each (Supplied on Cut Tape) |
All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them. Image is for illustrative purposes only. Please refer to product description.
All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.
$1.64
Texas Instruments SN74HC574DWR Flip-Flop 74HC574 D 24 ns MHz Soic—
$1.64
Texas Instruments SN74HC574DWR Flip-Flop 74HC574 D 24 ns MHz Soic
The SN74HC574DWR is an octal edge-triggered D-type Flip-flop with 3-state outputs. It is designed specifically for bus driving. They are particularly suitable for implementing buffer registers, I/O ports, bidirectional bus drivers and working registers. The eight flip-flops enter data on the low-to-high transition of the clock (CLK) input. A buffered output-enable (OE\) input can be used to place the eight outputs in either a normal logic state (high or low logic levels) or the high-impedance state. In the high-impedance state, the outputs neither load nor drive the bus lines significantly. The high-impedance state and increased drive provide the capability to drive bus lines without interface or pull-up components. OE\ does not affect the internal operations of the flip-flops. Old data can be retained or new data can be entered while the outputs are in the high-impedance state.
All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.
- High-current 3-state non-inverting outputs drive bus lines directly or up to 15 LSTTL loads
- Bus-structured pinout
- 22ns Typical tpd
- 80?A Maximum low power consumption
- ?6mA Output drive at 5V
- 1?A Maximum low input current
- Green product and no Sb/Br
Communications & Networking, Industrial
Other details
| Brand | TEXAS INSTRUMENTS |
| Part Number | SN74HC574DWR |
| Quantity | Each (Supplied on Cut Tape) |
All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them. Image is for illustrative purposes only. Please refer to product description.
All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The SN74HC574DWR is an octal edge-triggered D-type Flip-flop with 3-state outputs. It is designed specifically for bus driving. They are particularly suitable for implementing buffer registers, I/O ports, bidirectional bus drivers and working registers. The eight flip-flops enter data on the low-to-high transition of the clock (CLK) input. A buffered output-enable (OE\) input can be used to place the eight outputs in either a normal logic state (high or low logic levels) or the high-impedance state. In the high-impedance state, the outputs neither load nor drive the bus lines significantly. The high-impedance state and increased drive provide the capability to drive bus lines without interface or pull-up components. OE\ does not affect the internal operations of the flip-flops. Old data can be retained or new data can be entered while the outputs are in the high-impedance state.
All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.
- High-current 3-state non-inverting outputs drive bus lines directly or up to 15 LSTTL loads
- Bus-structured pinout
- 22ns Typical tpd
- 80?A Maximum low power consumption
- ?6mA Output drive at 5V
- 1?A Maximum low input current
- Green product and no Sb/Br
Communications & Networking, Industrial
Other details
| Brand | TEXAS INSTRUMENTS |
| Part Number | SN74HC574DWR |
| Quantity | Each (Supplied on Cut Tape) |
All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them. Image is for illustrative purposes only. Please refer to product description.
All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.
