sE Electronics V Kick Dynamic Percussion Instrument Microphone for Drums & Bass
- Dynamic Microphone
- Supercardioid Pickup Pattern
- 2 Tone-Shaping Switches on Rear of Mic
- Excellent Isolation from other Drums
- Rich Low End
- Transient-Rich Response
- Aluminum Voice Coil & All-Metal Chassis
- Capsule is Decoupled from Housing
- Built-In Windscreen for Plosives
- Knurled Nut for 3rd Party Mounting
Primarily designed for kick drums, floor-toms, and electric bass, the sE Electronics V Kick is a dynamic microphone with a supercardioid polar pattern. It's intended to be quite versatile, with four different tonalities thanks to two switches mounted on the rear of the mic. One switch controls the frequency content of the midrange, while the other changes the high-frequency capture of the V Kick.
Thanks to these switches, you can secure a rounded midrange with a softer high end, a scooped midrange with a defined high end�or the complete opposite: A scooped midrange with a softer high-end, or a round midrange with a softer high end. This allows you to use the mic with all sorts of styles of kick drum, from big-band jazz to aggressive metal. The same is true for basses. You can tailor this mic for something that complements a round, vintage Ampeg tone, or a more modern back-pickup style.
These switches are positioned on the rear of the mic, and this helps with live-sound functionality. With different bands switching their instruments between sets, this mic can be of service in keeping changeover time to a minimum in club venues.
At the heart of the V Kick is its DMC7 SB capsule, which utilizes an aluminum voice coil for a transient-rich sound and a bottom end extending low enough to record the fundamental frequencies of kick drums and basses. Its supercardioid pickup pattern ensures little bleed, helping you isolate the sound-source from other drums or cymbals. The capsule is suspended inside the mic to keep it decoupled from mechanical vibration, shocks, jolts, and other issues.
The mic's all-metal housing is rugged, making the mic suitable for live use on the road. A gold-plated XLR connector helps to provide a reliable signal connection. With a windscreen built into the mic, it's already internally protected against winds, plosives, and extraneous noise. A black windscreen and a knurled nut for third-party mounting kits are included.
sE Electronics V Kick Specs
| Analog Performance | |
|---|---|
| Sound Field | Mono |
| Transducer | Dynamic |
| Tube | No |
| Polar Pattern | Supercardioid |
| Frequency Range | 20 Hz to 19 kHz |
| Impedance | Supercardioid: 300 Ohms |
| Load Impedance | 1 kOhms Less than 1 kOhm |
| Sensitivity | Supercardioid: 0.2 mV/Pa Supercardioid: 0.4 mV/Pa |
| General | |
|---|---|
| Output Connectors | 1 x 3-Pin XLR |
| Length | 5.31" / 135 mm |
| Diameter | 2.36" / 60 mm |
| Weight | 16.51 oz / 468 g |
| Packaging Info | |
|---|---|
| Package Weight | 1.515 lb |
| Box Dimensions (LxWxH) | 10.9 x 5.3 x 3.1" |
All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.
More Images
sE Electronics V Kick Dynamic Percussion Instrument Microphone for Drums & Bass
- Dynamic Microphone
- Supercardioid Pickup Pattern
- 2 Tone-Shaping Switches on Rear of Mic
- Excellent Isolation from other Drums
- Rich Low End
- Transient-Rich Response
- Aluminum Voice Coil & All-Metal Chassis
- Capsule is Decoupled from Housing
- Built-In Windscreen for Plosives
- Knurled Nut for 3rd Party Mounting
Primarily designed for kick drums, floor-toms, and electric bass, the sE Electronics V Kick is a dynamic microphone with a supercardioid polar pattern. It's intended to be quite versatile, with four different tonalities thanks to two switches mounted on the rear of the mic. One switch controls the frequency content of the midrange, while the other changes the high-frequency capture of the V Kick.
Thanks to these switches, you can secure a rounded midrange with a softer high end, a scooped midrange with a defined high end�or the complete opposite: A scooped midrange with a softer high-end, or a round midrange with a softer high end. This allows you to use the mic with all sorts of styles of kick drum, from big-band jazz to aggressive metal. The same is true for basses. You can tailor this mic for something that complements a round, vintage Ampeg tone, or a more modern back-pickup style.
These switches are positioned on the rear of the mic, and this helps with live-sound functionality. With different bands switching their instruments between sets, this mic can be of service in keeping changeover time to a minimum in club venues.
At the heart of the V Kick is its DMC7 SB capsule, which utilizes an aluminum voice coil for a transient-rich sound and a bottom end extending low enough to record the fundamental frequencies of kick drums and basses. Its supercardioid pickup pattern ensures little bleed, helping you isolate the sound-source from other drums or cymbals. The capsule is suspended inside the mic to keep it decoupled from mechanical vibration, shocks, jolts, and other issues.
The mic's all-metal housing is rugged, making the mic suitable for live use on the road. A gold-plated XLR connector helps to provide a reliable signal connection. With a windscreen built into the mic, it's already internally protected against winds, plosives, and extraneous noise. A black windscreen and a knurled nut for third-party mounting kits are included.
sE Electronics V Kick Specs
| Analog Performance | |
|---|---|
| Sound Field | Mono |
| Transducer | Dynamic |
| Tube | No |
| Polar Pattern | Supercardioid |
| Frequency Range | 20 Hz to 19 kHz |
| Impedance | Supercardioid: 300 Ohms |
| Load Impedance | 1 kOhms Less than 1 kOhm |
| Sensitivity | Supercardioid: 0.2 mV/Pa Supercardioid: 0.4 mV/Pa |
| General | |
|---|---|
| Output Connectors | 1 x 3-Pin XLR |
| Length | 5.31" / 135 mm |
| Diameter | 2.36" / 60 mm |
| Weight | 16.51 oz / 468 g |
| Packaging Info | |
|---|---|
| Package Weight | 1.515 lb |
| Box Dimensions (LxWxH) | 10.9 x 5.3 x 3.1" |
All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
- Dynamic Microphone
- Supercardioid Pickup Pattern
- 2 Tone-Shaping Switches on Rear of Mic
- Excellent Isolation from other Drums
- Rich Low End
- Transient-Rich Response
- Aluminum Voice Coil & All-Metal Chassis
- Capsule is Decoupled from Housing
- Built-In Windscreen for Plosives
- Knurled Nut for 3rd Party Mounting
Primarily designed for kick drums, floor-toms, and electric bass, the sE Electronics V Kick is a dynamic microphone with a supercardioid polar pattern. It's intended to be quite versatile, with four different tonalities thanks to two switches mounted on the rear of the mic. One switch controls the frequency content of the midrange, while the other changes the high-frequency capture of the V Kick.
Thanks to these switches, you can secure a rounded midrange with a softer high end, a scooped midrange with a defined high end�or the complete opposite: A scooped midrange with a softer high-end, or a round midrange with a softer high end. This allows you to use the mic with all sorts of styles of kick drum, from big-band jazz to aggressive metal. The same is true for basses. You can tailor this mic for something that complements a round, vintage Ampeg tone, or a more modern back-pickup style.
These switches are positioned on the rear of the mic, and this helps with live-sound functionality. With different bands switching their instruments between sets, this mic can be of service in keeping changeover time to a minimum in club venues.
At the heart of the V Kick is its DMC7 SB capsule, which utilizes an aluminum voice coil for a transient-rich sound and a bottom end extending low enough to record the fundamental frequencies of kick drums and basses. Its supercardioid pickup pattern ensures little bleed, helping you isolate the sound-source from other drums or cymbals. The capsule is suspended inside the mic to keep it decoupled from mechanical vibration, shocks, jolts, and other issues.
The mic's all-metal housing is rugged, making the mic suitable for live use on the road. A gold-plated XLR connector helps to provide a reliable signal connection. With a windscreen built into the mic, it's already internally protected against winds, plosives, and extraneous noise. A black windscreen and a knurled nut for third-party mounting kits are included.
sE Electronics V Kick Specs
| Analog Performance | |
|---|---|
| Sound Field | Mono |
| Transducer | Dynamic |
| Tube | No |
| Polar Pattern | Supercardioid |
| Frequency Range | 20 Hz to 19 kHz |
| Impedance | Supercardioid: 300 Ohms |
| Load Impedance | 1 kOhms Less than 1 kOhm |
| Sensitivity | Supercardioid: 0.2 mV/Pa Supercardioid: 0.4 mV/Pa |
| General | |
|---|---|
| Output Connectors | 1 x 3-Pin XLR |
| Length | 5.31" / 135 mm |
| Diameter | 2.36" / 60 mm |
| Weight | 16.51 oz / 468 g |
| Packaging Info | |
|---|---|
| Package Weight | 1.515 lb |
| Box Dimensions (LxWxH) | 10.9 x 5.3 x 3.1" |
All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.
