✨ New Arrivals Just Dropped!Explore
HomeStore
Fluke FLUKE 355 Clamp Meter Current Voltage Frequency Resistance 2 kA 600 V 1 kV 400 Kohm True RMS
Fluke FLUKE 355 Clamp Meter Current Voltage Frequency Resistance 2 kA 600 V 1 kV 400 Kohm True RMS
Confidently take reliable readings with the true-rms, the Fluke 355 Clamp Meters; the tools of choice for high current measurement up to 2000 A. The extra-wide jaw easily clamps around large conductors, typically found in high current applications. The rugged design and CAT IV 600 V, CAT III 1000 V ratings add an extra element of protection when taking high-powered measurements. Accurate peak measurements can be taken using the in-rush current mode - ideal for motors and inductive loads. The 355 also measures voltage and resistance, making this the most versatile tool for utilities, electrical contractors and industrial service technicians.
- Reliably handle a wide range of high-current applications
- The large 58 mm (2.3 in) jaw capacity is suitable for large or multiple conductors
- CAT IV 600 V, CAT III 1000 V rating for added user protection
- In-rush current measurement captures 'power-on' surge current with accuracy and repeatability
- Accurately measure frequency up to 1 kHz for optimum troubleshooting
- Quickly analyse readings using the MIN, MAX, and AVG functions
- A large backlit display allows for easy visibility in low-lit areas
- Use the display hold feature to capture readings even when the display cannot be viewed
- Resistance to 400K ohms coupled with a continuity beeper provide the convenience
- Use the low-pass filter to smooth out noisy loads and stabilise readings
Industrial, Maintenance & Repair, Test & Measurement
ContentsC43 Soft Meter Case, 6 AA batteries, TL224 SureGrip® Silicone Test Lead Set, TP2 Slim Reach Test Probe Set (2 mm), AC285 SureGrip® Crocodile Clip Set, user manual
Footnotes Calibration services available for this product. Choose from a Standard Certificated Service or an internationally recognised UKAS accredited calibration. Visit our calibration page for more details.Product details
| DMM Functions | Current, Voltage, Frequency, Resistance |
| Current Measure AC Max | 2kA |
| Voltage Measure AC Max | 600V |
| Voltage Measure DC Max | 1kV |
| Resistance Measure Max | 400kohm |
| DMM Response Type | True RMS |
| Range Selection | Auto |
| No. of Digits | 3.75 |
| Jaw Opening Max | 58mm |
| Product Range | Fluke 350 Series |
Other details
| Brand | FLUKE |
| Part Number | FLUKE 355 |
| Quantity | Each |
| Technical Data Sheet EN |  |
All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them. Image is for illustrative purposes only. Please refer to product description.
$684.66
Original: $2,282.21
-70%Fluke FLUKE 355 Clamp Meter Current Voltage Frequency Resistance 2 kA 600 V 1 kV 400 Kohm True RMS—
$2,282.21
$684.66Fluke FLUKE 355 Clamp Meter Current Voltage Frequency Resistance 2 kA 600 V 1 kV 400 Kohm True RMS
Confidently take reliable readings with the true-rms, the Fluke 355 Clamp Meters; the tools of choice for high current measurement up to 2000 A. The extra-wide jaw easily clamps around large conductors, typically found in high current applications. The rugged design and CAT IV 600 V, CAT III 1000 V ratings add an extra element of protection when taking high-powered measurements. Accurate peak measurements can be taken using the in-rush current mode - ideal for motors and inductive loads. The 355 also measures voltage and resistance, making this the most versatile tool for utilities, electrical contractors and industrial service technicians.
- Reliably handle a wide range of high-current applications
- The large 58 mm (2.3 in) jaw capacity is suitable for large or multiple conductors
- CAT IV 600 V, CAT III 1000 V rating for added user protection
- In-rush current measurement captures 'power-on' surge current with accuracy and repeatability
- Accurately measure frequency up to 1 kHz for optimum troubleshooting
- Quickly analyse readings using the MIN, MAX, and AVG functions
- A large backlit display allows for easy visibility in low-lit areas
- Use the display hold feature to capture readings even when the display cannot be viewed
- Resistance to 400K ohms coupled with a continuity beeper provide the convenience
- Use the low-pass filter to smooth out noisy loads and stabilise readings
Industrial, Maintenance & Repair, Test & Measurement
ContentsC43 Soft Meter Case, 6 AA batteries, TL224 SureGrip® Silicone Test Lead Set, TP2 Slim Reach Test Probe Set (2 mm), AC285 SureGrip® Crocodile Clip Set, user manual
Footnotes Calibration services available for this product. Choose from a Standard Certificated Service or an internationally recognised UKAS accredited calibration. Visit our calibration page for more details.Product details
| DMM Functions | Current, Voltage, Frequency, Resistance |
| Current Measure AC Max | 2kA |
| Voltage Measure AC Max | 600V |
| Voltage Measure DC Max | 1kV |
| Resistance Measure Max | 400kohm |
| DMM Response Type | True RMS |
| Range Selection | Auto |
| No. of Digits | 3.75 |
| Jaw Opening Max | 58mm |
| Product Range | Fluke 350 Series |
Other details
| Brand | FLUKE |
| Part Number | FLUKE 355 |
| Quantity | Each |
| Technical Data Sheet EN | |
All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them. Image is for illustrative purposes only. Please refer to product description.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Confidently take reliable readings with the true-rms, the Fluke 355 Clamp Meters; the tools of choice for high current measurement up to 2000 A. The extra-wide jaw easily clamps around large conductors, typically found in high current applications. The rugged design and CAT IV 600 V, CAT III 1000 V ratings add an extra element of protection when taking high-powered measurements. Accurate peak measurements can be taken using the in-rush current mode - ideal for motors and inductive loads. The 355 also measures voltage and resistance, making this the most versatile tool for utilities, electrical contractors and industrial service technicians.
- Reliably handle a wide range of high-current applications
- The large 58 mm (2.3 in) jaw capacity is suitable for large or multiple conductors
- CAT IV 600 V, CAT III 1000 V rating for added user protection
- In-rush current measurement captures 'power-on' surge current with accuracy and repeatability
- Accurately measure frequency up to 1 kHz for optimum troubleshooting
- Quickly analyse readings using the MIN, MAX, and AVG functions
- A large backlit display allows for easy visibility in low-lit areas
- Use the display hold feature to capture readings even when the display cannot be viewed
- Resistance to 400K ohms coupled with a continuity beeper provide the convenience
- Use the low-pass filter to smooth out noisy loads and stabilise readings
Industrial, Maintenance & Repair, Test & Measurement
ContentsC43 Soft Meter Case, 6 AA batteries, TL224 SureGrip® Silicone Test Lead Set, TP2 Slim Reach Test Probe Set (2 mm), AC285 SureGrip® Crocodile Clip Set, user manual
Footnotes Calibration services available for this product. Choose from a Standard Certificated Service or an internationally recognised UKAS accredited calibration. Visit our calibration page for more details.Product details
| DMM Functions | Current, Voltage, Frequency, Resistance |
| Current Measure AC Max | 2kA |
| Voltage Measure AC Max | 600V |
| Voltage Measure DC Max | 1kV |
| Resistance Measure Max | 400kohm |
| DMM Response Type | True RMS |
| Range Selection | Auto |
| No. of Digits | 3.75 |
| Jaw Opening Max | 58mm |
| Product Range | Fluke 350 Series |
Other details
| Brand | FLUKE |
| Part Number | FLUKE 355 |
| Quantity | Each |
| Technical Data Sheet EN | |
All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them. Image is for illustrative purposes only. Please refer to product description.
